The whole RP family tree — различия между версиями
Материал из ЭНЭ
EvgBot (обсуждение | вклад) м (→Curing by light through masks) |
Evgen (обсуждение | вклад) м (Защищена страница «The whole RP family tree» [edit=autoconfirmed:move=sysop]) |
||
| (не показано 17 промежуточных версии 4 участников) | |||
| Строка 12: | Строка 12: | ||
|} | |} | ||
| − | == | + | == Preface == |
Originally document under name '''The whole RP family tree''' was placed at http://ltk.hut.fi/~koukka/RP/rptree.html | Originally document under name '''The whole RP family tree''' was placed at http://ltk.hut.fi/~koukka/RP/rptree.html | ||
| Строка 19: | Строка 19: | ||
This article should be wiki-based version of «The whole RP family tree» | This article should be wiki-based version of «The whole RP family tree» | ||
| + | === Legend === | ||
| + | :[[image:Redpoint.gif]] Method not commercially available anymore or research is ended | ||
| + | :[[image:Yellowpoint.gif]] Method under research | ||
| + | :[[image:Greenpoint.gif]] Commercial method | ||
| + | :[[Изображение:Equipment manufacture.gif]] Equipment manufacture | ||
== Liquids == | == Liquids == | ||
=== Photocurable Liquids === | === Photocurable Liquids === | ||
==== Curing by light through masks ==== | ==== Curing by light through masks ==== | ||
| − | * [[image:Redpoint.gif]] Solid Ground Curing (SGC) by [http://www.cubital.com/ Cubital Inc.] Dead link, look at [http://web.archive.org/web/20011127035906/http://www.cubital.com/ Internet archive] | + | * [[image:Redpoint.gif]] Solid Ground Curing (SGC) by [http://www.cubital.com/ Cubital Inc.] [[image:usa.gif]] [[image:israel.gif]], Dead link, look at [http://web.archive.org/web/20011127035906/http://www.cubital.com/ Internet archive] |
| − | * [[image:Redpoint.gif]] Design-Controlled Automated Fabrication (DESCAF) by [http://lightsculpting.com/ Light Sculpting Inc.] | + | * [[image:Redpoint.gif]] Design-Controlled Automated Fabrication (DESCAF) by [http://lightsculpting.com/ Light Sculpting Inc.] [[image:usa.gif]] |
| − | * Rapid Micro Product Development (RMPD) by [http://www.microtec-d.com/ MicroTEC] | + | * [[image:Greenpoint.gif]] Rapid Micro Product Development (RMPD) by [http://www.microtec-d.com/ MicroTEC] [[image:germany.gif]] |
| − | * [[image:Yellowpoint.gif]] Microstereolithography at [http://lmis4.epfl.ch/ LMIS4 - Group of Prof. Ph. Renaud, by Ecole Polytechnique Fédérale de Lausanne, EPFL)] look also at [http://personnes.epfl.ch/113143 publications by Arnaud Bertsch] | + | * [[image:Yellowpoint.gif]] Microstereolithography at [http://lmis4.epfl.ch/ LMIS4 - Group of Prof. Ph. Renaud, by Ecole Polytechnique Fédérale de Lausanne, EPFL)][[Image:Switzerland.gif]], look also at [http://personnes.epfl.ch/113143 publications by Arnaud Bertsch] |
==== Curing with a visible light laser ==== | ==== Curing with a visible light laser ==== | ||
| − | * Mark 1000 by Quadrax Laser Technologies Inc. (company merged to 3D Systems 1992) | + | * [[image:Redpoint.gif]] Mark 1000 by Quadrax Laser Technologies Inc. (company merged to 3D Systems 1992) [[image:usa.gif]] |
==== Curing with an UV-laser (single beam)<ref>These methods are more or less same as stereolithography</ref> ==== | ==== Curing with an UV-laser (single beam)<ref>These methods are more or less same as stereolithography</ref> ==== | ||
| − | * StereoLithography (SLA) | + | * [[image:Greenpoint.gif]] [[image:Equipment manufacture.gif]] StereoLithography (SLA)<ref>SLA refers to an apparatus, but an acronym SLA is more familiar to masses than SL.</ref> by [http://www.3dsystems.com/ 3D Systems] [[image:usa.gif]] |
| − | * Stereolithography by Aaroflex Inc. | + | * [[image:Greenpoint.gif]] Stereolithography by [http://www.aaroflex.com/ Aaroflex Inc.] [[image:usa.gif]] |
| − | * Stereolithography by Russian Academy of Sciences | + | * [[image:Greenpoint.gif]] [[image:Equipment manufacture.gif]] Stereolithography by [http://shatura.laser.ru/WWW.LASER.RU/rapid/index.html Russian Academy of Sciences] [[image:ru.gif]] |
| − | * Stereos (Stereos line was sold to 3D System 1997) by EOS | + | * [[image:Redpoint.gif]] Stereos (Stereos line was sold to 3D System [[1997]]) by [http://www.eos.info/ EOS] [[image:germany.gif]] |
| − | * | + | * [[image:Greenpoint.gif]] [[image:Equipment manufacture.gif]] Stereolithography by [http://www.fockeleundschwarze.de Fockele & Schwarze] [[image:germany.gif]] |
| − | * Solid Laser Diode Plotter System (SLP) by Denken | + | * [[image:Greenpoint.gif]] [[image:Equipment manufacture.gif]] (???) [Solid Laser Diode Plotter System (SLP) by [http://www.denken-eng.co.jp/ Denken] [[image:japan.gif]] |
| − | * Solid Creation System (SCS) by | + | * [[image:Greenpoint.gif]] [[image:Equipment manufacture.gif]] Solid Creation System (SCS) by [http://www.sonysms.co.jp Sony Manufacturing Systems Corporation] [[image:japan.gif]] |
| − | * Soliform by Teijin-Seiki | + | * [[image:Redpoint.gif]] Soliform by Teijin-Seiki [[image:japan.gif]] |
| − | * | + | * [[image:Greenpoint.gif]] [[image:Equipment manufacture.gif]] (resine manufacture) Solid Object Ultra-Violet Laser Plotting (SOUP) [http://www.cmet.co.jp/en CMET] (in original ''The whole RP family tree'' - Mitsubishi/CMET; [http://www.cmet.co.jp/en/company/hist.html according to company's history page] - [[2001]] business merged with Opto-image Company, belonging to Teijin Seiki Ltd, [[2000]], company name changed to CMET Inc., [[1992]] Teijin Seiki Co., Ltd released the SOLIFORM stereolithography system, [[1990]] - CMET founded, [[1988]] SOUP, the first stereolithography machine in Japan was released) [[image:japan.gif]] |
| − | + | * UniRapid by Unirapid Inc. [[image:japan.gif]] | |
| − | * Meiko by Meiko | + | * [[image:Greenpoint.gif]] [[image:Equipment manufacture.gif]] Meiko by [http://www.meiko-rps.com/ Meiko] [[image:japan.gif]] |
| − | * Air Bubble Stereolithography by Osaka Sangyo University | + | * Air Bubble Stereolithography by Osaka Sangyo University [[image:japan.gif]] |
| + | |||
==== Curing with two laser beams simultaneously ==== | ==== Curing with two laser beams simultaneously ==== | ||
* Holographic Interference Solidification by Quadtec | * Holographic Interference Solidification by Quadtec | ||
| Строка 55: | Строка 61: | ||
== Powders == | == Powders == | ||
| + | === Melting of powder === | ||
| + | ==== Sintering with a heat transferring laser ==== | ||
| + | * [[image:Redpoint.gif]] Selective Laser Sintering (SLS) by [http://www.dtm-corp.com/ DTM Corporation] (was sold to/eat by 3D System at 2001), dead link, web site content lost: Internet archive can't show history [[image:usa.gif]] | ||
| + | * [[image:Greenpoint.gif]] SLS (Solid Imaging Solutions) by [http://www.3dsystems.com/ 3D Systems][[image:usa.gif]] | ||
| + | * [[image:Greenpoint.gif]] Direct Plastic/Metal Laser Sintering (DMLS) by [http://www.eos.info/ EOS] [[image:germany.gif]] | ||
| + | * [[image:Yellowpoint.gif]] Selective Laser Sintering of Ceramics by Rheinisch-Westfalische Technische Hochschule Aachen [[image:germany.gif]] | ||
| + | * [[image:Yellowpoint.gif]] Selective Laser Reaction Sintering (SLRS) by University of Texas [[image:usa.gif]] | ||
| + | * [[image:Yellowpoint.gif]] [http://www.rockwellscientific.com/structuralmaterials/index.html#Direct%20Metal%20Fabrication Direct Metal Fabrication] (DMF) by [http://www.rockwellscientific.com/ Rockwell Scientific] [[image:usa.gif]] | ||
| + | * [[image:Yellowpoint.gif]] Compacted-powder SLS by The University of Manchester [[image:gb.gif]] | ||
| + | |||
| + | ==== Melting with a heat transferring laser ==== | ||
| + | * Laser Engineered Net Shaping (LENS) by Optomec/Sandia National Laboratories (nowadays method is called DMDS - Direct Material Deposition System) [[image:usa.gif]] | ||
| + | * Lasform by AeroMet [[image:usa.gif]] | ||
| + | * Direct Metal Deposition (DMD) by Precision Optical Manufacturing/The University of Michigan [[image:usa.gif]] | ||
| + | * Direct Light Fabrication (DLF) by Los Alamos National Laboratory [[image:usa.gif]] | ||
| + | * Controlled Metal Buildup (CMB) by Fraunhofer IPT [[image:germany.gif]] | ||
| + | * Direct Light Fabrication by University of Birmingham's School of Metallurgy and Materials[[image:gb.gif]] | ||
| + | * Laser Aided Direct Rapid Prototyping (LADRP) by University of Central Florida[[image:usa.gif]] | ||
| + | * Laser-aided Powder Solidification / Powder Jet (LAPS-J) by Institute fЭr Strahlwerkzeuge (IFSW), The University of Stuttgart [[image:germany.gif]] | ||
| + | * [[image:Greenpoint.gif]] [[image:Equipment manufacture.gif]] Selective-laser-melting by [http://www.fockeleundschwarze.de Fockele & Schwarze] [[image:germany.gif]] | ||
| + | |||
== Solid materials == | == Solid materials == | ||
== Sheets == | == Sheets == | ||
Текущая версия на 13:34, 15 декабря 2008
The whole RP family tree
|
Русский вариант этой страницы |
| English-language interface: |
Содержание
Preface
Originally document under name The whole RP family tree was placed at http://ltk.hut.fi/~koukka/RP/rptree.html
After some time web page by koukka was deleted and next it's copy was found at Archive.org and plased at http://shatura.laser.ru/Rapid/rptree/rptree.html
This article should be wiki-based version of «The whole RP family tree»
Legend
Method not commercially available anymore or research is ended
Method under research
Commercial method
Equipment manufacture
Liquids
Photocurable Liquids
Curing by light through masks
- Solid Ground Curing (SGC) by Cubital Inc.
, Dead link, look at Internet archive
- Design-Controlled Automated Fabrication (DESCAF) by Light Sculpting Inc.
- Rapid Micro Product Development (RMPD) by MicroTEC
- Microstereolithography at LMIS4 - Group of Prof. Ph. Renaud, by Ecole Polytechnique Fédérale de Lausanne, EPFL)
, look also at publications by Arnaud Bertsch
Curing with a visible light laser
- Mark 1000 by Quadrax Laser Technologies Inc. (company merged to 3D Systems 1992)
Curing with an UV-laser (single beam)[1]
- StereoLithography (SLA)[2] by 3D Systems
- Stereolithography by Aaroflex Inc.
- Stereolithography by Russian Academy of Sciences
- Stereos (Stereos line was sold to 3D System 1997) by EOS
- Stereolithography by Fockele & Schwarze
- (???) [Solid Laser Diode Plotter System (SLP) by Denken
- Solid Creation System (SCS) by Sony Manufacturing Systems Corporation
- Soliform by Teijin-Seiki
- (resine manufacture) Solid Object Ultra-Violet Laser Plotting (SOUP) CMET (in original The whole RP family tree - Mitsubishi/CMET; according to company's history page - 2001 business merged with Opto-image Company, belonging to Teijin Seiki Ltd, 2000, company name changed to CMET Inc., 1992 Teijin Seiki Co., Ltd released the SOLIFORM stereolithography system, 1990 - CMET founded, 1988 SOUP, the first stereolithography machine in Japan was released)
- UniRapid by Unirapid Inc.
- Meiko by Meiko
- Air Bubble Stereolithography by Osaka Sangyo University
Curing with two laser beams simultaneously
- Holographic Interference Solidification by Quadtec
- Beam Interference Solidification by Batelle Development Corporation
- Photochemical Machining by Formigraphics Inc.
Curing by visible light with a dvd-device
- Direct Photo Shaping (DPS) by SRI International (1998-2001) Dead link, look at Internet archive
Hybrid, combining inkjet-technique and curing with an UV-lamp
- Objet 3D-printer by Objet Geometries Ltd.
Electrical conducting Liquid (Electrolyte)
Water
Powders
Melting of powder
Sintering with a heat transferring laser
- Selective Laser Sintering (SLS) by DTM Corporation (was sold to/eat by 3D System at 2001), dead link, web site content lost: Internet archive can't show history
- SLS (Solid Imaging Solutions) by 3D Systems
- Direct Plastic/Metal Laser Sintering (DMLS) by EOS
- Selective Laser Sintering of Ceramics by Rheinisch-Westfalische Technische Hochschule Aachen
- Selective Laser Reaction Sintering (SLRS) by University of Texas
- Direct Metal Fabrication (DMF) by Rockwell Scientific
- Compacted-powder SLS by The University of Manchester
Melting with a heat transferring laser
- Laser Engineered Net Shaping (LENS) by Optomec/Sandia National Laboratories (nowadays method is called DMDS - Direct Material Deposition System)
- Lasform by AeroMet
- Direct Metal Deposition (DMD) by Precision Optical Manufacturing/The University of Michigan
- Direct Light Fabrication (DLF) by Los Alamos National Laboratory
- Controlled Metal Buildup (CMB) by Fraunhofer IPT
- Direct Light Fabrication by University of Birmingham's School of Metallurgy and Materials
- Laser Aided Direct Rapid Prototyping (LADRP) by University of Central Florida
- Laser-aided Powder Solidification / Powder Jet (LAPS-J) by Institute fЭr Strahlwerkzeuge (IFSW), The University of Stuttgart
- Selective-laser-melting by Fockele & Schwarze
Solid materials
Sheets
Gas, atoms and other odd stuff
Mics
References
Это черновик статьи. Вероятно, статья находится в процессе написания.
