The whole RP family tree — различия между версиями

Материал из ЭНЭ
Перейти к: навигация, поиск
м (→‎Curing with an UV-laser (single beam)These methods are more or less same as stereolithography)
м (→‎Powders)
Строка 62: Строка 62:
  
 
== Powders ==
 
== Powders ==
 +
=== Melting of powder ===
 +
==== Sintering with a heat transferring laser ====
 +
* [[image:Redpoint.gif]]  Selective Laser Sintering (SLS) by [http://www.dtm-corp.com/ DTM Corporation]  (was sold to/eat by 3D System at 2001), dead link, web site content lost: Internet archive can't show history [[image:usa.gif]]
 +
* [[image:Greenpoint.gif]] SLS (Solid Imaging Solutions) by [http://www.3dsystems.com/ 3D Systems][[image:usa.gif]]
 +
* [[image:Greenpoint.gif]] Direct Plastic/Metal Laser Sintering (DMLS) by [http://www.eos.info/ EOS] [[image:germany.gif]]
 +
* [[image:Yellowpoint.gif]] Selective Laser Sintering of Ceramics by Rheinisch-Westfalische Technische Hochschule Aachen [[image:germany.gif]]
 +
* [[image:Yellowpoint.gif]] Selective Laser Reaction Sintering (SLRS) by University of Texas [[image:usa.gif]]
 +
* [[image:Yellowpoint.gif]] [http://www.rockwellscientific.com/structuralmaterials/index.html#Direct%20Metal%20Fabrication Direct Metal Fabrication] (DMF) by [http://www.rockwellscientific.com/ Rockwell Scientific] [[image:usa.gif]]
 +
* [[image:Yellowpoint.gif]] Compacted-powder SLS by The University of Manchester [[image:gb.gif]]
 +
 
== Solid materials ==
 
== Solid materials ==
 
== Sheets ==
 
== Sheets ==

Версия 12:23, 5 сентября 2008

The whole RP family tree

Русский вариант этой страницы
(Russian version of The whole RP family tree)

English-language interface:

Preface

Originally document under name The whole RP family tree was placed at http://ltk.hut.fi/~koukka/RP/rptree.html

After some time web page by koukka was deleted and next it's copy was found at Archive.org and plased at http://shatura.laser.ru/Rapid/rptree/rptree.html

This article should be wiki-based version of «The whole RP family tree»

Legend

Redpoint.gif Method not commercially available anymore or research is ended
Yellowpoint.gif Method under research
Greenpoint.gif Commercial method
Equipment manufacture.gif Equipment manufacture

Liquids

Photocurable Liquids

Curing by light through masks

Curing with a visible light laser

  • Redpoint.gif Mark 1000 by Quadrax Laser Technologies Inc. (company merged to 3D Systems 1992) Usa.gif

Curing with an UV-laser (single beam)[1]

  • Yellowpoint.gif LMS by Fockele & Schwarze Germany.gif
  • Solid Laser Diode Plotter System (SLP) by Denken
  • Solid Creation System (SCS) by Sony/D-MEC
  • Soliform by Teijin-Seiki
  • UniRapid by Unirapid Inc.
  • Solid Object Ultra-Violet Laser Plotting (SOUP) by Mitsubishi/CMET
  • Meiko by Meiko
  • Air Bubble Stereolithography by Osaka Sangyo University

Curing with two laser beams simultaneously

  • Holographic Interference Solidification by Quadtec
  • Beam Interference Solidification by Batelle Development Corporation
  • Photochemical Machining by Formigraphics Inc.

Curing by visible light with a dvd-device

  • Direct Photo Shaping (DPS) by SRI International (1998-2001) Dead link, look at Internet archive

Hybrid, combining inkjet-technique and curing with an UV-lamp

  • Objet 3D-printer by Objet Geometries Ltd.

Electrical conducting Liquid (Electrolyte)

Water

Powders

Melting of powder

Sintering with a heat transferring laser

  • Redpoint.gif Selective Laser Sintering (SLS) by DTM Corporation (was sold to/eat by 3D System at 2001), dead link, web site content lost: Internet archive can't show history Usa.gif
  • Greenpoint.gif SLS (Solid Imaging Solutions) by 3D SystemsUsa.gif
  • Greenpoint.gif Direct Plastic/Metal Laser Sintering (DMLS) by EOS Germany.gif
  • Yellowpoint.gif Selective Laser Sintering of Ceramics by Rheinisch-Westfalische Technische Hochschule Aachen Germany.gif
  • Yellowpoint.gif Selective Laser Reaction Sintering (SLRS) by University of Texas Usa.gif
  • Yellowpoint.gif Direct Metal Fabrication (DMF) by Rockwell Scientific Usa.gif
  • Yellowpoint.gif Compacted-powder SLS by The University of Manchester Gb.gif

Solid materials

Sheets

Gas, atoms and other odd stuff

Mics

References

  1. ↑ These methods are more or less same as stereolithography
  2. ↑ SLA refers to an apparatus, but an acronym SLA is more familiar to masses than SL.


Это черновик статьи. Вероятно, статья находится в процессе написания.
Источник — «http://wiki.laser.ru/index.php?title=The_whole_RP_family_tree&oldid=14167»